PRODUCTS > 367F Sanitary Ball Valve: 3-Piece Tube Full Port: Diverter

Product Description

Pressure & Temperature Chart

Schematic Diagram

Materials and Measurements

Click here for a full Cut Sheet
(PDF format)


Product Description

Features and Benefits:

  • Tube Full Port Design
    True tube full port construction eliminates pooling of process media and improves flow characteristics for greater efficiency

  • Made of Corrosion-Resistant 316 SS (A-351 Gr. CF8M)
    One valve can be used for many service conditions
  • ISO 5211 Direct Mount Pad
    No bracket or drive coupling needed for automation
    Eliminates exposed moving parts for safer work environment
    Improves actuator positioning and prevents side loading of the stem seal
  • High-Cycle, Live-Loaded Stem Packing
    Ensures tight seal
    Extends service life

  • O-Ring Stem Bearing
    Maintains stem alignment
    Reduces packing side loading and wear Enhances stem seal

  • Blow-Out-Proof Stem
    Stem is bottom loaded to prevent removal when valve is in service

  • Lockout Capability
    Enables plant personnel to secure valve in open or closed position when manually operated

  • Investment Cast
    Improved dimensional control and reduced porosity

  • Internal Surfaces Roll Burnished Prior To Final Polish
    Reduces surface porosity
    Improves surface finish

  • 25 Ra Internal Surface Finish
The 367F series diverter valve incorporates several innovative design features for improved process performance. This tube full-port valve is available in side or bottom porting and several flow configurations. The 3-piece design yields enhanced performance at a cost saving. The ISO 5211 mounting pad allows for direct mounting of most actuators.

Operating / Test Conditions:

  • Temperature Range (TFM seats): -20 to 420 F

  • Maximum Working Pressure (TFM seats): 
    1000 PSI CWP (1/2" - 1")
    800 PSI CWP (1 1/2" - 2")

  • Valves inspected and tested to API 598 and meet MSS SP-61 seat leakage requirements

  • All materials comply with applicable ASTM material specifications, and FDA, USDA and ASME BPE 1997 material requirements

  • All soft wetted parts comply with FDA CFR Title 21 Part 177
  • Material test reports available upon request

Options:

  • Polish and Electro-polish to custom specification

  • Cavity filled

  • Jacketed
  • Bottom Porting

  • L- or T-port Ball


Pressure & Temperature Chart

(TFM Seats)


Schematic Diagram

*Bottom Entry Drawing


Materials & Measurements

Materials List

Item
Part Name
Material
Qty
1
Body
A351 Gr. CF8M
1
2
Ball
316SS
1
3
Seat
316L SS
2
4
Body Seal
316L SS
2
5
Stem
TFM
1
6
Thrust Washer
TFM
1
7
Stem O-Ring
304SS
1
8
Stem Packing - B
304SS
1
9
Stem Packing - A
PEEK
1
10
Packing Gland
Viton 90
1
11
Belleville Washer
TFM
4
12
Gland Nut
304SS
1
13
Gland Nut Lock Washer
301SS
1
14
Stem Spacer
304SS
1
15
Handle
304SS
1
16
Handle Nut Lock Washer
304SS
1
17
Handle Nut
304SS
1
18
Handle Cover
304SS
1
19
Positioning Pin Nut
304SS
1
20
Split Lock Washer
304SS
1
21
Positioning Pin Nut
Vinyl
1
22
End Cap
A351 Gr. CF8M
2
23
Body Bolt
304SS
4
24
Body Nut
304SS
4
25
Pin
316SS
1

 


DIMENSIONS (Inches)

Size
L
L1
C
P
M
H
h
D1
d1
D2
d2
D3
D4
S
ISO 5211 Pattern
Weight (lbs)
1/2
3.50
1.75
3.14
0.37
5.39
1.89
0.38
1.42
0.22
1.97
0.28
0.47
0.99
0.35
F03/F05*
2.10
3/4
4.00
2.00
3.26
0.62
6.69
1.98
0.44
1.65
0.22
1.97
0.28
0.55
1.18
0.43
F04/F05*
3.50
1
4.50
2.25
3.47
0.87
6.69
2.18
0.42
1.65
0.22
1.97
0.28
0.47
1.18
0.43
F04/F05*
5.20
1 1/2
5.50
2.75
4.36
1.37
8.46
2.83
0.60
1.97
0.28
2.76
0.35
0.71
1.38
0.55
F05/F07*
10.9
2
6.25
3.13
5.33
1.87
6.00
3.48
0.79
2.76
0.35
4.02
0.44
0.87
2.17
0.67
F07/F10*
21.9

*Direct mount with stem adapter bushing

Due to continuous product development, information may change without notice.